Trimet Prag s.r.o.

EN AB-47100 << back

Chemical designation: EN AB-AlSi12Cu1(Fe)
Previous Swedish standard: Type -

Chemical composition:

	Min %	Max %
Si	10,5	13,5
Fe	0,6	1,1
Cu	0,7	1,2
Mn	-	0,55
Mg	-	0,35
Cr	-	0,10
Ni	-	0,30
Zn	-	0,55
Pb	-	0,20
Sn	-	0,10
Ti	-	0,15

General description of properties:
Eutectic alloy with excellent castability properties, excellent fluidity and high resistance to hot tearing. Good machinability.

Suitable applications:
For complicated thin-wall, pressure-tight casting that are subjected to fatigue loading.

Heat treatment:
Not usually age hardened

Others each max 0,05%
and total max 0,15%

Casting characteristics, S-Sand cast, K-Chill cast:

Solidification range, ºC, about	Casting temperature ºC, about	Fluidity	Resistance to hot tearing	Shrinkage %, about	Pressure tightness
580-530	650-700	Excellent	Excellent	0,5 -0,8	Excellent

Mechanical properties of separately untreated cast test bars:

Tensile strength, Rm, MPa, min.	Proof stress Rp0,2, MPa, min.	Elongation A50, %, min.	Brinell hardness HBS, min.
240	140	1	70

Mechanical and physical properties:

Density Kg/Dm³	Strength	Machinability	Weldability	Resistance to corrosion
2,65	Good	Satisfact.	Poor	Satisfact.

Decorative anodizing	Ability to be polished	Linear thermal expansion 293-373ºK, ºK¯¹	Electrical conductivity MS/m	Thermal conductivity W/mºK
Not recom.	Satisfact.	20 x 10¯6	15 – 20	120 - 150